Reliability and Quality of Measurement Results Increased

In simple terms, a claw pole is a fist-sized piece of metal with six or eight hooked teeth pointing upwards and a hole in the middle. It is a key component of alternators, i.e. generators, which supply practically every motorized vehicle with power. Unfortunately, there is hardly a straight surface, barely a symmetrical tooth, rarely a perpendicular edge. A challenge for quality inspection: up to 10 different gauges were used in the past. Random measurements were time consuming and susceptible to errors. The greatest problem became obvious with the latest claw pole generation developed at Bosch, which will deliver up to 30 percent more power: the parts are shaped so that many features cannot even be inspected with manual measuring equipment.

Today, two DuraMax measuring machines from ZEISS ensure that maximum quality is achieved. "Without these coordinate measuring machines, we would not even have been able to measure the new claw pole," emphasizes Uwe Kasten from metrology methodology development at Bosch. "When this measuring machine was introduced at the 2008 Control Show, we knew that it was exactly what we had been looking for." A robust machine for shopfloor use, sufficiently accurate for the required tolerances and economical. After comparing various providers and numerous test measurements, Bosch invested in two ZEISS DuraMax machines in November 2008: one for claw pole production and one for tool-making for the initial inspection of the punching and forming tools.