ZEISS ScanBox Series 4 RC
Automated loading and measurement of parts
ZEISS ScanBox 4105 RC (Remote Control) is an optical 3D measuring machine with a motorized sliding door. Parts up to 500 mm in size can be loaded into the ZEISS ScanBox 4105 RC with a robot or an individually configured feeding system and placed on the rotation table module. The elimination of manual individual placement significantly reduces the time required and thus ensures a higher throughput in quality assurance.
Autonomous part inspection
The autonomous operation of the ZEISS ScanBox Series 4 RC increases machine utilization, speeds up measurement cycle times and allows you to deploy your personnel more efficiently. The system was specially developed for applications that require a high degree of throughput and integration.
High throughput for serial monitoring
Repeatable and precise measurement sequences
For efficient quality assurance of series products, production processes must be monitored, scrap reduced and cost-intensive reworking minimized. The optical 3D measuring machine ZEISS ScanBox Series 4 RC with the ATOS Q sensor supports you in this: The full-field actual data of the series parts can be compared directly with the CAD model or with specifications from the measurement plan. Create inspection reports directly at the production facilities and export the data directly to statistical process-control systems.
Automated process control
Quick set-up and low personnel costs
Program the optical 3D measuring machine via the ergonomic user interface integrated into the control tower. With the ZEISS ScanBox 4105 RC, automated part inspection is carried out via a start signal from a higher-level controller. ZEISS offers communication interfaces based on fieldbuses (CC-Link, ProfiBus, ProfiNet, EtherCat, EtherNet/IP, OPC UA).
Maximum machine utilization and optimized processes
Individually configurable loading systems
With a feeding and loading system from ZEISS, you can tap into the full potential of the ZEISS ScanBox Series 4 RC. Automate part loading, avoid downtime and optimize the flow of parts and operating time with the ZEISS Integration Series.
Two models for automated loading & inspection of parts
Use ZEISS ScanBox 4105 RC and ZEISS ScanBox 4105 RC for eMotors for automated quality assurance and serial monitoring directly in production. Thanks to automatic loading and unloading, repeatable and precise measuring processes and low personnel costs, you can deploy your employees more efficiently.
Technical data
|
|
|
---|---|---|
Dimensions |
1860 x 1200 x 2120 mm |
1860 x 1200 x 2120 mm |
Power supply |
200–500 V (3-phase, 16 A) |
200–500 V (3-phase, 16 A) |
Max. part size |
Ø 500 mm |
Ø 500 mm |
Max. part weight |
100 kg |
100 kg |
Opening width |
680 mm |
680 mm |
Sensor compatibility |
ATOS Q |
ATOS Q for eMotors |