ZEISS ScanBox Series 5
Modular concept for maximum flexibility
ZEISS ScanBox Series 5 is an all-in solution for automated inspection and digitization of complex parts. The series consists of three models and offers many options for customizing to your needs - that's what we call the new modularity. The individual components are identical and therefore offer perfect possibilities for upgrading to different layouts. The maximum load of the rotation table module is 2000 kg.
ZEISS ScanBox Series 5: versatile and flexible
Ergonomic functions
Operation while standing or sitting
The new, flexible user interface offers various ergonomic functions to support the user. A swivel arm integrated into the electronic switch cabinet can be set to the desired position, allowing the ZEISS ScanBox Series 5 system to be operated while standing or sitting.
Optical serial measurement
Optimize your series testing
ZEISS ScanBox Series 5 optimizes your series inspection and supports you in checking your production processes. The powerful 3D measuring machine provides you with full-field measuring results for CAD comparison in a very short time, visualizes possible deviations from GD&T and accelerates your production, maintenance and repair processes. Use the system for fast acquisition of specific measurement features and geometries, such as surface and edge points, holes or bores. Standardized and automated procedures increase throughput of parts and reduce scrap. The ZEISS ScanBox Series 5 systems allow for high process reliability during operation thanks to trend analyses in real time. Changes within the production can thus be identified quickly.
Customized for airfoil inspections
Quality control of complex freeform surfaces
ZEISS ScanBox 5110 is predestined for inspecting airfoils. Developed for gas turbine industries, ATOS 5 for Airfoil with its optimized working distance and measuring areas from 100 x 70 mm² delivers high-precision 3D data of the smallest details. You can measure a complete blisk in less than an hour. A turbine blade is inspected within a few minutes.
Automated loading and autonomous part inspection
ZEISS ScanBox Serie 5 RC
ZEISS ScanBox Series 5 RC (Remote Control) is an optical measuring machine with a motorized sliding door. With a robot or a customized loading system, you automatically load parts such as airfoils, attached parts or tools into ZEISS ScanBox Series 5 RC and place them on the rotation table module. As the user does not have to place the individual parts, the time required for quality assurance is significantly shorter than before. The autonomous operation increases machine utilization, accelerates measuring cycles and allows you to deploy your staff more efficiently.
Virtual Measuring Room
Real environment in a virtual simulation
The virtual measuring room (VMR) is the central control and measurement planning software for all elements of the optical measuring cells. In the VMR, the real environment, that is, robots, sensors and parts in the measuring cell, is functionally displayed in a simulation. Programming includes the kinematics of the robot paths, the fixture and the measurement plan. Thanks to the VMR, the user can work with the system without requiring specific robot programming skills. All robot movements are simulated and checked for safety before being performed in the actual environment.
Effective analysis tool
ZEISS INSPECT offers everything from a single source
Scanning, inspecting and reporting: Evaluate nominal-actual comparisons as well as GD&T. Implement necessary corrections directly thanks to easy-to-understand results. With ZEISS INSPECT you can carry out complete analyses, receive comprehensive reporting and integrate measurement results into existing processes.
Three models for quality assurance during production
Have your production processes changed? Are you facing new quality assurance challenges? Then adapt the optical 3D measuring machine to your needs. Thanks to identical components, upgrades to larger layouts are possible without any problems.
ZEISS ScanBox Serie 5 MU: Automated. Modular. Customer-oriented.
Virtual Clamping technology
The Virtual Clamping technology eliminates multiple measurement loops for parts that are typically measured on mechanical fixtures with four support points.
Metrology Stories
Accompany our customers through their production and learn more about the many possibilities of ScanBox systems for quality assurance in series production.
Download information
Technical information
|
|
|
|
---|---|---|---|
Dimensions |
2200 x 3550 x 3050 mm (LC*) |
3600 x 4250 x 3050 mm (LC) |
4300 x 4250 x 3050 mm (LC) |
Power supply |
200-500 V (3-phase, 16A) |
200-500 V (3-phase, 16A) |
200-500 V (3-phase, 16A) |
Max. part size |
Ø 1000 mm |
Ø 2000 mm |
Ø 3000 mm |
Max. part weight |
2000 kg |
2000 kg |
2000 kg*** |
Opening width |
1000 mm (LC) |
2400 mm (LC) |
3100 mm (LC) |
Sensor compatibility |
ATOS 5 for Airfoil, ATOS 5**** |
ATOS 5, ATOS 5 for Airfoil |
ATOS 5 |