ZEISS METROTOM 1500

ZEISS METROTOM 1500 features outstanding image quality that depicts even small defects clearly. The software AMMAR, BHC, and the hardware module ZEISS scatterControl make the difference for unchallenged quality. The CT is furthermore specified according to the VDI/VDE 2630 guideline for traceable accuracy.​

Thanks to ZEISS’ high level of metrology expertise, which is also used in CT technology, you can rely on high measurement accuracy. An MPE(SD) of 4.5 + L/50 μm according to VDI/VDE 2630 Sheet 1.3 is guaranteed over the entire field of view - for measurement results you can trust.

ZEISS METROTOM 1500 scans small parts in very high resolution and parts of up to 615 mm in diameter and 800 mm in height as a complete reconstruction. This is achieved by expanding the field of view both horizontally and vertically. Thanks to its flexible tube with a focal spot of only a few micrometers on one side and a maximum power of 500 W on the other, small parts can be scanned with very high resolution and large parts can be scanned in a short amount of time. This makes the system ideal for many applications

Higher quality standards in the automotive, medical, or pharmaceutical industry often require the application of accredited CT inspection procedures. These guarantee an objective, standard-compliant measurement of parts according to VDI/VDE 2630 Part 1.3. DAkkS calibration is also available for the ZEISS METROTOM 1500 series of industrial computed tomographs. Benefit from the added value: save costs and create more trust for your customers.​

The comparably small footprint and the clever construction of the door for both, service and part loading, allow flexible installation, enabling you to fit the CT into your measuring lab even if space is limited. To help you make the most of the available space, we have furthermore expanded the measuring volume while reducing the footprint: Measure and inspect parts of 870 mm in height on a footprint of 3.7 x 1.8 meters – the best system/part volume ratio available on the market.​

With traditional measuring technology, hidden structures can only be inspected after the time- and cost-consuming process of destroying the component layer-by-layer. ZEISS METROTOM 1500, however, is an industrial computed tomography system for measuring and inspecting complete components made of plastic and/or light metal or even copper or steel. ​